SPECIFICATIONS

Press Specifications

Model Number........................................................ GS2-630-425x150

Force × Distance off Bottom.................................. 6300 kN x 6 mm (710 tons x 0.236 in.)

Energy..................................................................... 110 kJ (486 in-tons) @ 40 spm

Connection Points................................................... 2

Lube Unit Location................................................. Standalone Floor Level, RHR

Approximate Press Weight..................................... 145,000 kg (320,000lbs.)

Scale and Display Units.......................................... Inch/Metric

Shop Air Pressure, Minimum.................................. 5.9 bar (590 kPa) (85 psi)

Press Slide Specifications

Stroke Length.......................................................... 400 mm (15.7 in.)

Max. Speed - Continuous (reduced rating)............. 45 spm

Max. Speed in pendulum 150 mm *....................... 78 spm

Max. Speed in pendulum 125 mm *....................... 82 spm

Max. Speed in pendulum 100 mm *....................... 88 spm

Max. Speed in pendulum 80 mm *......................... 93 spm

      * Rate depends on stroke profile and press mechanical properties

Area of Slide, R-L × F-B........................................ 4250 x 1500 mm (167 x 59 in.)

Slide Face Machining.............................................. Standard

Overload Travel....................................................... 25 mm (0.98 in.)

Overload Recovery Time........................................ 120 seconds

Maximum Upper Die Weight................................. 7,000 Kg (15,430 lbs.)

Press Bolster Specifications

Bolster Plate Material.............................................. Steel

Bolster Plate Thickness........................................... 190 mm (7.5 in.)

Area of Bolster, R-L × F-B..................................... 4250 x 1500 mm (167 x 59 in.)

Opening in Bolster, R-L × F-B............................... None

Bolster Plate Machining.......................................... Standard (Engineering Don’t Release)

Press Frame Specifications

Upright Passline Opening, F-B............................... 1500 mm (59 in.)

Area of Bed, R-L × F-B.......................................... 4250 x 1500 mm (167 x 59 in.)

Opening in Bed, R-L (F-B ribs) × F-B................... 3700 (5) x 650 mm (145.7 x 25.6 in.)

Bed/Slide Deflection at 67% of Die Area............... 0.125 mm/m (0.0015 in/ft)

Shutheight, Maximum (SDAU).............................. 850 mm (33.5 in)  Bolster to Slide

Shutheight Adjustment........................................... 400 mm (15.7 in.)

Accuracy of Slide Adjustment................................ 0.1 mm